FS-7842 Automative A/C Hose Crimping tool
FS-7842 Automative A/C Hose Crimping Tools
Open the relief valve to fully recess the piston, and then close tightly.
Rotate the yoke fully counter clock-wise to bottom out the adapter seat.
Warning: DO NOT actuate the piston without having a hose and fitting in place to crimp. This could damage the tool Also be careful not to place hands near any pinch points while using the tools.
*Remove pin and open top yoke.
NOTE: It may be necessary to turn the body counter clock-wise until top yoke can be rotated away from piston.
*Select correct die set:
Standard Hose Reduced Barrier Hose
NOTE: Be sure to correct size die set! Failure to do so could cause leakage or failure of the crimp!
*Insert dies into yoke.
*Position fitting and hose in crimper and close top yoke.
*Insert pin securely.
Note: Make sure pin snaps securely into place before crimping process is started
*Turn body of tool clockwise until dies are snug against hose fitting.
*Turn hydraulic value to CLOSED position.
*Pump handles to crimp fitting onto hose. Continue pumping until handle comes to a stop.
Note: Place the body of the tool against a solid body to create more leverage during the crimping process.
*Once crimp is complete, turn hydraulic valve to OPEN position.
*Turn body of tool counter clockwise until top yoke can be rotated away from piston portion of yoke.
*Remove holding pin and open yoke.
*Remove hose assembly.
If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.