ZCB6-5 Electric Pump
Hydraulic Electric Pump Features
1 High and low speed two stage for quick oil output. Turbine oil absorption could ensure max. Effective oil volume.
2 High pressure is for driving piston and low pressure is for piston reset.
3 Oil pipe fitted with quick coupling could be ordered at any length.
4 Oil pipe coupling fitted with PT 3/8” thread.
ZCB6-5 Electrical Pumps is more quickly and energy-saving than hand hydraulic pumps used for hydraulic crimping tools, hydraulic cable cutters, hydraulic pipe benders, hydraulic cylinders, hydraulic gear pullers, hydraulic hole diggers, hydraulic busbar processing machines and many other hydraulic tools.
1. The electric pump must use10# mechanical oil.
2. The oil capacity must over the oil window.
3. It mst use the oil filtration net to filter when add or change the oil. Clean the oil case when change the oil.
4. Open the deflation bolt and release the check valve before use.
5. Stop working when the temperature of electrical over 75°C
6. The pressure is already adjusted 63MPa when it leaves a factory, don’t adjust the pressure over 63MPa without pressure meter.
Rated output 0.75Kw Motor voltage: 220V/380V Rate of output: High 63Mpa Low 2.5Mpa Oil capacity: High 0.8L/min Low 5L/min Height approx.470mm Weight: approx.30.00kg
- [Download not found]
If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.